Machine of great production

It is a medium-high capacity installation, of high quality, with a vibrocompresora of great resistance.

The batching plant is of 750/500 litres, with 2 vibrating axes of 15 Kw for the filling and compression of the mould, with a tray of 1200 x 700 mm, a capacity of 7,5 blocks of 20 x 20 x 40, or 7 ceiling blocks of 15, o 0,5 m2 of pavers per cycle. 

Rometa 2030 machine produces pieces such as pavers, blocks, ceiling blocks or kerbstones 1 MT. 

The block making machine can be complemented by a more or less complete set, from the 2030-60 configuration, that includes the machine, exit table and elevator-lowerator of 10 trays, to an elevator-lowerator configuration of 20 trays with automatic packing and batching plant with 2 o 3 aggregates (2030-90).

The installation 2030 is available in 3 configurations: ROMETA 2030-60 • ROMETA 2030-80 • ROMETA 2030-90.

• Structural chassis 180 x 180 x 8 mm.
• 
Tray 1200-1400 x 700 mm.

• Non-stop vibration, inverter 20 CV.
• 2 synchronised vibrating shafts and 1 motor.
• 4 columns of 70mm.
• Tray inyector with speed adjuntament according to the mould. 
• Fabrication from 50 mm to 300 mm.

• Hydraulic equipment of 22 Kw.
• Machine weight: 8.200 kg.

• Mixer of 750 litros. With Skip.

• Planetary, with 3 peripheral arms.
• Hydraulic opening.
• 12 mm interchangeable and lateral bottoms.

• Gear motor in oil bath with 2 exits.
• Trays brush and trays turn.

• Static or mobile shelves dryer system.
•  60:
  • With elevator of 10 trays and forklift.
  • Mobile shelves with operator.
• 80:
  • 12 tray automatic rack charger. 
  • Full and empty racks store.
  • Without forklift waste of time.
  • With forklift and operator.
  • Mobile drying shelves.
• 90:
  • With elevator of 20 trays.
  • With automatic finger car (robot).
  • Static dryer shelves.

• With Scada for installation control.
• Visual contol of the installation.

• On-line assistance.

• PLC Inverter Lenze.

• Fully automatic gantry type palletizer.
• All movements with frequency inverter.

• 90-180 degrees turn with gearwheel.
• Closing by 4 sides.
• With pomp motor.

• Set of 3 or 4 hoppers. 20 m3.
• Automatic and programmable aggregate weighing.