Machine of great production

It is a fully automatic installation with a static and very versatile quality, its assembly is simple and easy to operate.

Batching plant capacity is 565/375 liters, with 2 vibrating shafts of 11 Kw for the filling and compression of the mould, with a tray of 1200 x 600 mm,  with a capacity of 5 blocks of 20 x 20 x 40, or 7 ceiling blocks of 15, or 0.5 m2 of pavers per cycle.

Rometa 2010 produces pieces such as pavers, blocks, ceiling blocks o kurbstones 1 MT. 

The Block Making Machine can be complemented by a more or less complete set. From configuration 2010-10, which include the block machine, and exit table and a hand truck for three trays, up to a elevator and lowerator configuration for 8 trays with automatic packing system and Batching Plant with 2 o 3 aggregates (2010-50).

Rometa 2010 is available in 3 different configurations: ROMETA 2010-10 • ROMETA 2010-30 • ROMETA 2010-50.

• Structural chassis 140 x 140 x 8 mm.
• Tray 1200 x 600 mm.
• Non-stop vibration, inverter, 11Kw.
• 2 columns of 80 mm.
• Tray inyector with speed adjustment according to the mould.
• Production from 50 mm to 300 mm.
• 15 kw hydraulic equipment.
• Machine weight: 6.400kg.

• Mixer of 560 litres 15 CV, with Skip.

• Planetary, with 3 peripheral arms.
• Hydraulic opening.
• 12 mm interchangeable and lateral bottoms.

• Elevator of 8 trays.
• Non-stop operation.
• With forklift with operator.
• Gear box in oil bath with two exit.
• Tray brush.

• Optional tray turn.
• Shelves system dryer.

• With Scada, for installation control.
• Visual control of installation.
• On-line assistance.
• 
PLC Inverter Lenze.

• Fully automatic portic type packing.
• All movements with frequency inverter.
• 90-180 degrees turn with gear wheel.

• Set of 2 or 3 hoppers. 45 m3.
• Automatic and programmable aggregate weighing.
• Cement weighing by load cells.