IMPROVEMENTS WE CAN IMPLEMENT IN YOUR BLOCK FACTORY

FINGER CAR WITH ROTATION

The Rometa 4050 installation, where we need to reduce the cycle of the finger car, we installed a rotating carriage.
The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard car.

In the implantation with a rotating finger car, it allows us to have a curing through the "big room", with a more correct control of temperature and humidity, having the elevator, descender, and finger car within the same room.

We can reach 16 heights depending on the implantation.

The finger car has Wi-Fi control from the central cabin, allowing the operator to control and manipulate it, with an online assistance system.


Comparte el post

  • The rotation and translation is simultaneous, to reduce the cycle time, achieving reductions between 15 and 20% of the standard finger car.
  • Manufactured aggregates with which you can manufacture slabs, fences and channels of different types and with different techniques for the creation of concrete.
  • The drying of the pieces can become as important as their manufacture, therefore, we believe that it is essential that you have a drying area for the concrete pieces in your factory
  • In this part, we will talk about the importance of humification after drying 24 hours before palletizing.
  • In this part, we offer the reasons why we believe you need a laboratory (forlab) from Rometa in your factory, advising them on what and how to do it
    Quality
    ROMETA incorporates components from leading brands known worldwide in electrical and hydraulic equipment.
    Our company is certified in accordance to standard UNE-EN ISO 9001:2015 and our facilities meet the safety requirements of European Directive EEC 2006/42 / C.

    © ROMETA SA